Cleaning Solutions; Maintenance - U.S. Products HHP-150 Information & Operating Instructions

120v

Table of Contents

INSPECTION:

Carefully unpack and inspect your HHP-150 for shipping damage. Each machine is tested

and inspected before shipping. Any shipping damage incurred is the responsibility of the

carrier. You should notify the carrier immediately if you notice damage to the box or to the

machine or parts

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals. Powder chemicals may be used, but unless

mixed very thoroughly they could cause a build-up in the pump, lines, heat exchanger and/

or quick disconnects. Any problem caused by a chemical build-up is not covered by

warranty. Use a neutral cleaner with a pH between 5 and 10 to avoid premature wear of

the pump, seals, and/or other components. Damage caused by the use of strong

chemicals is not covered by the warranty.

For optimum performance flush the machine with clear water at the end of each working

day. Once a month, minimum, run a flushing compound through the machine to break up

any mineral or chemical build-up that may have formed. The vacuum motors, and the

pump do not require any scheduled maintenance; however, the motors may require

replacement brushes after 1000 - 1500 hours. Clean the body with an all-purpose

detergent, and protect it with an automobile interior polish. Lubricate the wheels, castors,

and quick disconnects with an all purpose silicone spray.

(and be sure to register your purchase to activate your warranty)

Serial Number: __________________

Model: HHP-150

Purchase Date:_____________

Write the name and phone number of your

distributor:

_____________________________________

Table of Contents