U.S. Products ADVANTAGE 1200 Information & Operating Instructions

240v
Hide thumbs Also See for ADVANTAGE 1200:

Advertisement

Quick Links

ADVANTAGE 1200
INFORMATION
OPERATING
INSTRUCTIONS
CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ
ALL SECTIONS OF THIS INSTRUCTION MANUAL
IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY
1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.
2. Connect the machine to a properly grounded outlet.
3. Keep machine from rain, snow, and extremes in temperatures. Store the machine in a
heated location. Use the machine indoors. Do not use outdoors.
4. Use approved chemicals only. NO SOLVENTS.
5. Wear gloves or use rags when removing quick disconnects to prevent burns.
6. Never use water above 54° C/130° F in the solution tank.
7. Never turn on the solution pump without your solution line connected to the machine
and the tool
&
240V
1
3/10 revised 11/11 Form No. 56041911

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ADVANTAGE 1200 and is the answer not in the manual?

Questions and answers

Summary of Contents for U.S. Products ADVANTAGE 1200

  • Page 1 ADVANTAGE 1200 240V INFORMATION & OPERATING INSTRUCTIONS CAUTION: DO NOT OPERATE MACHINE UNTIL YOU HAVE READ ALL SECTIONS OF THIS INSTRUCTION MANUAL IMPROPER USE OF THE MACHINE WILL VOID THE WARRANTY 1. Always use a defoamer when foaming occurs to prevent vacuum motor damage.
  • Page 2: Important Safety Instructions

    • Use extra care when cleaning on stairs. • Connect to a properly grounded outlet only. • Liquid ejected at the spray nozzle could be dangerous as a result of its temperature, pressure, or chemical content. FORM NO. 56041911 - ADVANTAGE 1200-240V...
  • Page 3: Cleaning Solutions

    Be sure to specify the machine model. Have your serial number handy. Serial Number: __________________ Model: 1200 PSI -240 Purchase Date:_____________ Write the name and phone number of your distributor: ___________________________________________ ___________________________________________ (and be sure to register your purchase to activate your warranty) FORM NO. 56041911 - ADVANTAGE 1200-240V...
  • Page 4: Switch Plate

    Hose Connection Pre-fi lter Bag Power Cords Vacuum Hose Connection Pressure Recovery Adjustment Cap Tank Drain Wheel Latch Pump-out Hose Base Connection Pressure Relief Valve (inside the base Solution compartment) Output Castor FORM NO. 56041911 - ADVANTAGE 1200-240V revised 11/11...
  • Page 5: Setup And Operation

    Disconnect the hoses from the cleaning tool. 13. Unplug the power cords. Clean the machine and the tool. Never store your machine outside, and keep it from extremes in temperature. FORM NO. 56041911 - ADVANTAGE 1200-240V...
  • Page 6 : Use care when handling hazardous chemicals. CAUTION: Never put water hotter than 130 °F / 54 °C in the holding tank. CAUTION : Never leave the 1200 psi pump running when you are not actively using it. FORM NO. 56041911 - ADVANTAGE 1200-240V...
  • Page 7 11/11 FORM NO. 56041911 - ADVANTAGE 1200-240V...
  • Page 8 Hose, pump bypass, 3/8” ID X 13” 1160K Pump rebuild kit, valves & O-rings 1160A Pump rebuild kit, plunger and seals * = Optional, Not Included [ ] = Not Shown = Revised or new since last update FORM NO. 56041911 - ADVANTAGE 1200-240V revised 11/11...
  • Page 9: Maintenance Schedule

    Debris is plugging cleaning tool or vacuum hose. LOW SUCTION Drain hose is not completely closed. Vacuum tank lid is not closed or seal is damaged. No power to motor. NO SUCTION Test the switch. Test the vacuum motor. revised 11/11 FORM NO. 56041911 - ADVANTAGE 1200-240V...
  • Page 10 425-322-0133 / 800-257-7982 / FAX: 425-322-0136 11015 - 47th Ave. W. / Mukilteo, WA 98275 VISIT US AT: http://www.usproducts.com...

Table of Contents