Cleaning Solutions; Maintenance - U.S. Products HP150-C Information & Operating Instructions

For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
INSPECTION:
Carefully unpack and inspect your HP150-C for shipping damage. Each machine is tested
and inspected before shipping. Any shipping damage incurred is the responsibility of the
carrier. You should notify the carrier immediately if you notice damage to the box or to the
.
machine or parts

CLEANING SOLUTIONS:

We recommend liquid cleaning chemicals, such as our Magic Fabric Cleaner. Powder
chemicals may be used, but unless mixed very thoroughly they could cause a build-up in the
pump, lines, heat exchanger and/or quick disconnects. Any problem caused by a chemical
build-up is not covered by warranty. Use a neutral cleaner with a pH between 6 and 9 to
avoid premature wear of the pump, seals, and/or other components. Damage caused by
the use of strong chemicals is not covered by the warranty.

MAINTENANCE:

For optimum performance flush the machine with clear water at the end of each working
day. Once a month, minimum, run a flushing compound through the machine to break up
any mineral or chemical build-up that may have formed. U.S. Products' "X-1500" is
recommended. The vacuum motors, and the pump do not require any scheduled
maintenance; however, the motors may require replacement brushes after 1000 - 1500
hours. Clean the body with an all-purpose detergent, and protect it with an automobile
interior polish. Lubricate the wheels, castors, and quick disconnects with an all purpose
silicone spray.
(and be sure to mail your warranty card)
For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
Serial Number: __________________
Model: HP150-C
Purchase Date:_____________
Write the name and phone number of your
distributor:
_____________________________________
_____________________________________