Step 2 - Filling With Engine Fuel - Qualcast XSS41D Assembly Manual

41cm petrol hand push lawnmower
Table of Contents

Advertisement

Preparing to Operate the Lawnmower

Step 2 - Filling with Engine Fuel

WARNING!
- Refuel in a well-ventilated area with the engine stopped. Do not smoke or allow flames or sparks
in the area where the engine is refueled or where petrol is stored. Avoid repeated or prolonged
contact with skin or inhalation of vapour.
CAUTION!
- Petrol is highly flammable and extreme precaution must be taken when handling or working with
it. Keep out of reach of children.
1 Clean the area around the petrol filler cap before removing the cap. Remove the warning tag, check
the fuel level.
2 Refill the tank if the fuel level is low. Always use clean, fresh unleaded petrol. Purchase fuel in
quantities that can be used within 30 days. Never mix oil with petrol.
3 Refuel carefully to avoid overfilling or spilling fuel to allow for expansion. There should be no fuel in
the filler neck.
4 Clean up any overflow or splashes of petrol before starting the engine.
5 Tighten the filler cap after filling, finger tight only.
NOTE! The Qualcast 41cm Hand Push Lawnmower has a maximum fuel capacity of 800ml.
8
Customer Helpline 01904 727500
www.gardenservicecentre.co.uk

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents