Qualcast XSS41D Assembly Manual page 17

Operating the Lawnmower
Step 2 - Starting the Engine (continued)
2a
A
2a Press the primer bulb (A) 3-5 times.
When starting a cold engine, press down the primer fully 3~5 times.
Pressing the primer button too many times could cause the engine to flood.
NOTE! When starting a warm engine, the primer does not need to be used. If the engine stops
due to a lack of petrol, refill and press down the primer 3~5 times.
2b
Engine stop
2b Start/Stop Bar Activation
Pull the Start/Stop bar towards you.
2c Pull cord handle
With right hand, slowly but firmly pull the starter handle and rope from the pull cord guide until
you feel resistance, then pull briskly. If the engine fails to start after three pulls, repeat the start
process. When the engine starts, return the starter rope to the pull cord guide gently.
3. To stop release stop/start bar
10
2c
Engine start
Customer Helpline 01904 727500
www.gardenservicecentre.co.uk