Advertisement
•
Open the door fully
•
Lift and tilt the safety catch part of
the hinge (fig. 6) so that it is fully
extended and points towards the
door.
•
Close the door most of the way, lift
it slightly and then pull it, safely but
firmly, towards you.
Replacing the appliance door
•
Hold the door to the appliance in
the closed position and manoeuvre
the hinges so that the part of the
hinge, highlighted by the star in fig.
7, inserts into the hinge slot in the
cavity frame.
•
Next, ensure the notch on the
underside of the hinge sits on the
lip of the hinge slot. Open the door
fully. Each hinge should be seated in the same way as the hinge
in fig. 8. If it is not, follow the steps for removing the door and try
replacing it again.
•
Finally, lift the safety catch part of the hinges back into place so
that they are lying flat against the hinges.
Please note: If the hinge safety catches are not in the correct place
then the door and/or appliance may receive damage when attempting
to close the door.
18
Fig. 7
Fig. 8
Advertisement
