Advertisement
damage.
•
Carefully remove the old bulb and dispose of it safely. Insert the
new bulb, ensuring that your hands are still protected. This will
also preserve the lifespan of the replacement bulb. The new bulb
must be able to withstand high temperature (300°C) and match the
following specifications: 230-240V, 50Hz, 25W, G9 fitting.
•
Refit the protective cover, taking care not to pinch or crimp the
cover gasket, and re-attach the four screws (fig. 5).
Important
Do not use any other tool, except for a screwdriver, to remove the
protective cover as this may damage the lamp assembly or the oven.
To avoid system damage check, regularly, that the water tank is full
when using steam functions. An acoustic signal will sound and the
water shortage symbol will be displayed to warm when the system
has detected a shortage.
Removing the appliance door
In order to allow for easier access into the oven cavity for cleaning, it
is possible to remove the door. Before
removing the door, ensure that you
have an area prepared in which you
can place the removed door. This
area should ideally be protected by
something like a folded, dirt-free, towel
to help prevent damage to surfaces
and the door.
Fig. 6
17
Advertisement
