Subscribe to Our Youtube Channel
Related Manuals for Dynascan DI651ST2
Summary of Contents for Dynascan DI651ST2
- Page 1 User Manual DI651ST2 Version 2.02 The use of diagrams and illustrations in the manual are for reference only. The actual product may be different. Product design and specifications are subject to change without notice...
-
Page 2: Table Of Contents
Navigating the On Screen Display (OSD) Menu .................. 17 Specifications ............................21 Input Mode ............................22 Pin Assignments ........................... 23 Digital RGB Input (DVI-D): DVI......................23 RS-232 Input ............................ 23 Troubleshooting ............................ 24 About DSM365 ............................. 25 DI651ST2 User Manual... -
Page 3: Material Contents Declaration
SJ/T-11363-2006 and EU 2005/618/EC. Recycling and Energy Information DynaScan is firmly committed to its environmental protection efforts and we believe that reducing our products’ impact on the environment is of the utmost importance. We are dedicated to meet the latest environmental protection regulations. -
Page 4: Declaration Of Conformity
( Device certification standard: EN 300 328 / EN 301 489-1/-17 / EN 55032 / EN 55024 / EN 60950 / EN 62311 ) - Frequency bands and Powers a. WIFI 2.4G-2412~2462MHz. b. Maximum radio-frequency power transmitted in the 2.4GHz is 50mW. DI651ST2 User Manual... -
Page 5: Safety Precautions
This phenomenon is known as image burn-in and is not covered by the manufacturer's warranty. In order to avoid burn-in, avoid prolonged display of static or fixed images on the screen. DI651ST2 User Manual... -
Page 6: Important Safety Information
Handle the LCD with care. Save the packaging materials for transport later. Clean the LCD backside at least once a month for dust and other particles. Unplug the LCD immediately and contact a DynaScan certified service professional as soon as possible when any of the following situations occurs: ... -
Page 7: Getting Started
Confirm that the accessories below are shipped along with the display. If any item is missing, please contact your dealer. The color and shape of the accessories may vary with the products. DI651ST2 Professional LCD. Power cable x1 pc. -
Page 8: Installation
The LCD must be properly installed using a wall mount. Incorrect installation may cause injury or damage the equipment. Product warranty does not cover the damage caused by improper installation and DynaScan shall not be held responsible in such incident. Refer to the mount manufacturer’s instructions for proper installation. - Page 9 Leave clearance around the outer edge of the LCD (or video wall matrix) from other objects to ensure proper ventilation. For installations with screens inset into the wall, refer to section: Enclosures for cooling and ventilation considerations. DI651ST2 User Manual...
- Page 10 Inspect the fasteners regularly for signs of loosening or deformation. Please perform appropriate corrective measures when a problem is identified. Neglecting the problem may worsen the situation. Increase the inspection frequency on areas where previous maintenance had occurred to ensure the problems do not occur again. DI651ST2 User Manual...
-
Page 11: Wall Mounting
A wall mount is not included. Please purchase a VESA Standard wall mount to secure the LCD. DynaScan is not responsible for damages caused by using non-standard wall mounts. Verify that the mounting location can support the weight of the LCD before installation. -
Page 12: Connecting An External Video Source
Connect the other end of the DVI cable (or DP cable, HDMI cable) to the DVI output (or DP output, HDMI output) of the video source. Refer to your video device’s manual for additional information. DI651ST2 User Manual... -
Page 13: Input / Output Terminals
13. RS-232 (OUT): RS232 control function for daisy chain application. 14. Audio (OUT): Connect the audio signal output from Audio IN jack to an external AV device. DI651ST2 ○ ○ ○ ○ ○ ○ ⑬ ○ ○ ○ ○ ○ ⑫ ⑭ DI651ST2 User Manual... -
Page 14: Operating Instructions
The operating range of the remote control is 2.5 meters (8 feet). Ambient light may affect the performance of the remote control. Avoid fluorescent or neon lights in the vicinity. DI651ST2 User Manual... - Page 15 DI651ST2 DI651ST2 User Manual...
- Page 16 Exit the current selection. RIGHT Select the highlighted item. DOWN Move the cursor down or change the setting of selected item. Enter (for DSM365 only) BACK Return to the last page. (for DSM365 only) DI651ST2 User Manual...
-
Page 17: Using The Rear Panel Controls
OSD On / Off, Power On / Off. Move the cursor up or change the setting of selected item. DOWN Move the cursor down or change the setting of selected item. LEFT Exit the current selection. RIGHT Select the highlighted item. DI651ST2 User Manual... -
Page 18: Navigating The On Screen Display (Osd) Menu
Selects the black level to adjust the screen gray scale. "Limited" for video source uses Black Level RGB Full 16 to 235 levels for R/G/B, such as HDMI. "RGB Full" for video source uses all levels from 0 to 255 levels. DI651ST2 User Manual... - Page 19 Range 0 – 100. High Level Time HH:MM Set high level time. Low Level Time HH:MM Set low level time. Adjusts the contrast. High is the highest Local Dimming contrast. Off is the lowest contrast. (Off, Low, Medium and High) DI651ST2 User Manual...
- Page 20 IR Control function can be enabled again from the control panel on the display or through the Advance DynaScan “Display Manager” application. When in Power Off Mode, RS-232 controls do not function. Only [Main Power Switch] Power Off Mode Standby on the display or [Power Button] on the remote control can wake up the display.
- Page 21 100% and Over Heat Protection is disabled. Some functions may not be available for all models. *Adjusted value: Each R/G/B value for this product has been individually adjusted during production to a preset color temperature of 6500K. DI651ST2 User Manual...
-
Page 22: Specifications
IN *1 / OUT *1 (support HDMI) IN *1 HDMI IN *1 RS-232 IN *1 / OUT *1 I/O Ports Audio OUT *1 RJ-45 SD card USB port 2.5A Fuse Design and specifications are subject to change without notice. DI651ST2 User Manual... -
Page 23: Input Mode
59.94 Hz 27 MHz 60 Hz 40 MHz 1024 60 Hz 65 MHz 1280 60 Hz 74.25 MHz 16:9 1280 60 Hz 79.5 MHz 1360 60 Hz 85.5 MHz 16:9 1920 1080 60 Hz 148.5 MHz 16:9 DI651ST2 User Manual... -
Page 24: Pin Assignments
Shield (RX0 / RX5) DDC-Serial Clock +5V power Shield (RXC) DDC-Serial Data Ground RXC+ Hot plug detect RXC- RS-232 Input PIN No. NAME Connected to 7&8 Connected to 6 Connected to 4 Connected to 1&8 Connected to 1&7 DI651ST2 User Manual... -
Page 25: Troubleshooting
Cannot control the display Check whether the RS-232 cable is connected properly. remotely via RS-232. If you are still having trouble with your DynaScan DS² Professional LCD, contact your dealer or DynaScan directly for more assistance. DI651ST2 User Manual... -
Page 26: About Dsm365
Press the MENU button on either the rear panel control or remote control to show the OSD. Use the navigation arrows to select and adjust the Input Source. [Input Source Main DSM365] ITEM DESCRIPTION APPS Show the Installed APPS. SETTINGS Enter the setting menu. DI651ST2 User Manual... - Page 27 Copyright © DynaScan Technology, Inc. All Rights Reserved. DI651ST2 User Manual...
Need help?
Do you have a question about the DI651ST2 and is the answer not in the manual?
Questions and answers