Preventive Maintenance; Recalibration - Agilent Technologies 280-DS MQS Operator's Manual

4 Troubleshooting and Maintenance

Preventive Maintenance

Recalibration

94
The 280-DS is calibrated to standards when the instrument is
assembled. Agilent recommends a recalibration interval of 12 months
under normal usage within the dissolution laboratory. To keep the
instrument at optimum performance within the calibration period,
please refer to the following information:
• The unit is designed to be stored, transported, and shipped in its
original carrying case.
• As with any delicate instrument or calibrated device, excessive
shipping or mishandling may warrant more frequent recalibration.
• Ultimately the end-user is responsible for establishing a
calibration interval and Agilent will accommodate more or less
frequent calibrations based on usage or needs.
• Agilent provides AS FOUND measurements for each parameter
upon recalibration to assist you in assuring the integrity of your
mechanical parameter measurements.
Recalibration of the 280-DS must be performed by an Agilent repair
center. To initiate this process, please call Agilent's Customer Service to
initiate a Service Request.
280-DS Operator's Manual