2. Start
up
At start up, the Bolero can display different screens, depending on the status or the machine:
• first install not yet completed, the first screen is 2b
• first install already completed, the first screen is 2a
2a
2b
2c
Machine information.
• After a few seconds the next screen will appear depending the
status of the machine:
► First install already completed,
the next screen is 2h or 2i.
First install, select your language:
• press or to scroll through the available languages
• press to confirm
► The installation menu is only shown when the machine is
switched on for the first time or is switched on after the factory
settings have been reset, see §5.3.14 on p.85.
Read the safety book!
• press to go the previous screen
• press to confirm
3