Table of Contents
Advertisement
5.1.9 Input test
For a proper fault analysis a diagnosis should be made first.
An input test can be performed for the following components:
• touchscreen
• door switch / safety key
► Despite the fact that sufficient safety measures are taken working with the systems may entail
risks. Our starting point is that people activating this menu are sufficiently skilled and therefore
able to properly assess these risks with respect to safety.
5.1.9
5.1.9a
5.1.9b
38
• floater
• low pressure pump
Input test
• press "input test" to confirm
• press or to scroll through the maintenance menu
Select an input test:
• press
to go to the next screen
test
• press or to select another component
Touch screen:
• touch the areas, they turn green if the button works
(touch it again and it turns black again)
► If not all blocks are tested within 20 seconds, the machine
returns to the previous screen. Next time, the previously tested
blocks are still green. This screen will not start a full black
screen until all blocks are green (OK tested).
• NTC1 (low position) and
NTC2 (high position)
Hide quick links:
Advertisement
Table of Contents
