Full Face Mask - ResMed AirSense 11 User Manual

Full Face Mask

1. Twist and pull both magnetic clips away from
the frame. With the logo on the headgear facing
outward, hold the mask against your face and pull the
headgear over your head.
2. Bring the lower straps below your ears and attach the
magnetic clip to the frame.
3. Undo the fastening tabs on the upper headgear
straps. Pull the straps evenly until the mask is stable and positioned as shown in the
illustrations. Reattach the fastening tabs.
4. Undo the fastening tabs on the lower headgear straps. Pull the straps evenly until the
mask sits firmly on the chin and reattach the fastening tabs.
5. Connect the air tubing from your device to the elbow. Attach the elbow to the mask
by pressing the side buttons and pushing the elbow into the mask.
6. To achieve a comfortable fit, readjust the straps. Evenly apply only enough tension so
that a seal is achieved.
Please refer to the manufacturer's instructions for additional information on topics,
such as:
• How to properly remove your mask
• How to remove and change the mask cushion
• How to adjust the length of the mask straps
8 | STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT
1.
4.
2.
5.
Questions? Call
3.
6.
888.452.4363