Full Face Mask - ResMed AirSense 10 User Manual

Full Face Mask

1. Twist and pull both magnetic clips away from the frame.
With the logo on the headgear facing outward, hold the mask
against your face and pull the headgear over your head.
2. Bring the lower straps below your ears and attach the
magnetic clip to the frame.
3. Undo the fastening tabs on the upper headgear straps. Pull the straps evenly until the mask is
stable and positioned as shown in the illustrations. Reattach the fastening tabs.
4. Undo the fastening tabs on the lower headgear straps. Pull the straps evenly until the mask sits
firmly on the chin and reattach the fastening tabs.
5. Connect the air tubing from your device to the elbow. Attach the elbow to the mask by pressing
the side buttons and pushing the elbow into the mask.
6. To achieve a comfortable fit, readjust the straps. Evenly, apply only enough tension so that a
seal is achieved.
Please refer to the manufacturer's instructions for additional information on topics, such as:
• How to properly remove your mask
• How to remove and change the mask cushion
• How to adjust the length of the mask straps
8 STEP 2: GET FAMILIAR WITH YOUR PAP EQUIPMENT
1.
4.
2.
5.
Questions? Call 888.452.4363
3.
6.