Interior Lamp; Beacon Light Switch; Overload Warning Switch; Cab Light Switch - Kubota KX080-3 Operator's Manual

BInterior Lamp
To turn on the interior lamp, set the interior lamp switch to
the "ON" positions.

(1) Interior lamp

BBeacon Light Switch

(1) Beacon light switch

It is equipped only with the switch (including the coupler
for connecting in a rear left speaker).
Since it isn't equipped with the beacon main part, please
install when required.
(A) "ON"
(B) "OFF"
CHECKS BEFORE START
BOverload Warning Switch
To avoid personal injury or death:
A Continuing to apply the load after the overload
warning horn sounds could result in the
machine tipping over. If the buzzer sounds,
stop operating the machine and lighten the
load.
When excavator is used in object handling operations, set
the overload warning switch to the "ON" position.
If a weight greater than the machine is designed to lift is
lifted, the overload warning device is activated and a
buzzer is sounded.

(1) Overload warning switch

BCab Light Switch
To turn on the cab light, set the starter switch to the
"RUN"( ) and then the cab light switch to the "ON"
positions, respectively.

(1) Cab light switch

7