Table of Contents
Advertisement
If any component should be missing, please contact your dealer.
Liquid Crystal Display Monitor: 1
Remote control unit: 1
Cable clamp: 3
Power cord
Remote control unit battery
(LR03 ("AAA" size)): 2
CD-ROM (Utility Disk): 1
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.
* For environmental protection!
Do not dispose of batteries in household waste. Follow the disposal instructions for your area.
Computer
Operating system
CPU
Memory
Free space on hard drive
To use the touch panel, connect the USB cable (supplied) to your computer.
Pen Software can be installed from the supplied CD-ROM.
When the Information Display Downloader is installed, you can check and download the most recent versions of the software
programs.
To install and use the software, see the manual for each.
Download the setup program for the SHARP Display Connect and Touch Viewing Software with the Information Display
Downloader.
Supplied Components
SHARP Display Connect License: 1
Setup Manual: 1
Touch pen: 1
Tray: 1
Tray mounting screw/
camera mount screw (M3) : 2 each
System Requirements
PC/AT compatible computer able to output a resolution of 1920 x 1080.
(CD-ROM drive required for software installation.)
Windows 7 (32-bit or 64-bit version), Windows 8.1 (32-bit or 64-bit version),
Windows 10 (32-bit or 64-bit version)
Intel Celeron B810E 1.6 GHz or faster
Intel Core i7-3517UE 1.7 GHz or faster recommended
At least 2 GB
At least 5 GB (free space separately required for data storage)
USB cable: 1
Camera mount: 1
Camera screw (inch thread): 1
Logo sticker: 1
Vertical sticker (Operation panel): 1
9
E
Advertisement
Table of Contents
