Table of Contents
Advertisement
Menu Items
nMONITOR ( )
PORTRAIT/LANDSCAPE INSTALL
LANDSCAPE .....Landscape orientation
PORTRAIT ........Portrait orientation
HORIZONTAL INSTALLATION
OFF ...................Portrait/landscape installation
UPWARD ...........The display screen faces up.
OSD H-POSITION
Adjusts the horizontal display position of menu screen.
OSD V-POSITION
Adjusts the vertical display position of menu screen.
OPERATION MODE
MODE1 ......OFF IF NO OPERATION is set to ON, and POWER SAVE MODE is set to ON.
(These settings can not be changed.)
MODE2 ......Will perform standard operation. OFF IF NO OPERATION is set to OFF, and POWER SAVE MODE is set to OFF.
These settings can be changed.
POWER SAVE MODE
When OFF is selected, startup time from standby mode is reduced. Note, however that, more power will be consumed in
standby mode.
When ON is selected, current consumption is reduced while the monitor is in standby mode. Note, however, that the startup
time from standby mode becomes longer.
OFF IF NO OPERATION
Determines whether or not to set the monitor to go into standby mode when there is no operation from the remote control unit,
RS-232C commands, or LAN for over 4 hours.
nPIP ( )
PIP MODES
Sets the display method.
OFF .................Displays one screen.
PIP ..................Displays a sub screen inside a main screen.
PbyP ................Displays a main screen and a sub screen in a line.
PIP SIZE
Sets the size of the sub screen in PIP mode.
PIP POS
Adjusts the position of the sub screen in PIP mode.
PIP SOURCE
Selects the input signal of the sub screen in PIP or PbyP mode.
SOUND CHANGE
Sets the sound which is output in PIP or PbyP mode.
RESET
Resets the values of the PIP menu items to the factory preset values.
Select ON and then press the ENTER button.
28
E
Advertisement
Table of Contents
