Table of Contents
Advertisement
■ OTHERS ( )
POWER MANAGEMENT
POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal waiting mode.
NO SIGNAL AUTO INPUT SEL.
Specify whether to change inputs automatically. When ON is selected and no signal is present in the selected input mode, the
monitor automatically changes the selected mode to another mode where a video signal is present.
LOGO SCREEN
Sets whether or not to display the logo screen.
ERASER FUNCTION
Set whether or not the eraser function (see page 24) is used.
RESUME BY TOUCH
Set whether or not the screen is restored when touched in the input signal waiting mode.
OFF .................Turn off screen restoration.
ON ...................Turn on screen restoration. Note that this will increase power consumption in the input signal waiting mode.
TOUCH PANEL MODE (HDMI/D-SUB/DisplayPort/OPTION)
Setting this to ON improves touch panel tracking. Some input signals may also cause screen distortion. If the screen becomes
distorted, set to OFF.
OPTION
Set whether or not the expansion slot is used.
MONITOR LOCK
You can disable operations on the monitor and the remote control unit that use buttons.
OFF ..................................Enables operation.
REMOTE CONTROL ....... Prohibits remote control operation.
MONITOR BUTTONS ...... Prohibits monitor button operation.
BOTH ............................... Prohibits remote control and monitor button operation.
To release the operation lock, perform the steps below.
1. Press the SIZE button until "F" appears in the upper left corner of the screen.
2. While "F" is displayed, press the
,
,
,
buttons in that order.
Menu Items
29
E
Advertisement
Table of Contents
