Sharp PN-S525 Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Monitor
  5. PN-S525
  6. Operation manual
Sharp PN-S525 Operation Manual

Sharp PN-S525 Operation Manual

Hide thumbs Also See for PN-S525:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
PN-S525
LCD MONITOR
OPERATION GUIDE

Advertisement

Table of Contents
loading

Related Manuals for Sharp PN-S525

Summary of Contents for Sharp PN-S525

  • Page 1 PN-S525 LCD MONITOR OPERATION GUIDE...

  • Page 2: Table Of Contents

    Basic Operation ...3 Menu Items ...5 Displaying the menu screen ...5 Menu item details ...6 Adjustments for PC screen display ...10 Initialization (Reset)/Functional Restriction Setting ... 11 Controlling the Monitor with a PC (RS-232C) ...12 PC connection ...12 Communication conditions ...12 Communication procedure ...12 RS-232C command table ...16 Controlling the Monitor with a PC (LAN) ...21...

  • Page 3: Basic Operation

    1. INPUT (Input mode selection) The menu is displayed. Press mode, and press to enter. * You can select the input terminal by pressing the input switch of the monitor. Input mode Video PC1 DVI-D PC1 input terminal PC2 HDMI PC2 input terminal PC3 D-SUB PC3 input terminal...

  • Page 4: Basic Operation

    Basic Operation nSwitching the screen size Even when the screen size is changed, the display may remain the same depending on the input signal. WIDE ZOOM 1 ZOOM 2 NORMAL Dot by Dot With a monitor of screen resolution 1600 x 1200 or 1920 x 1200, selecting Dot by Dot displays the NORMAL screen. TIPS •...

  • Page 5: Menu Items

    Displaying the menu screen Video and audio adjustment and settings of various functions are enabled. This section describes how to use the menu items. See pages 6 to 8 for details of each menu items. nExample of operation (Adjusting CONTRAST in the PICTURE menu) MENU 1.

  • Page 6: Menu Item Details

    Menu Items Menu item details The menu will differ depending on the input mode. nSCREEN AUTO (PC3/PC4) The CLOCK, PHASE, H-POS, and V-POS are automatically adjusted. Pressing performs adjustment. Use this automatic adjustment when you use the PC3 input terminal or PC4 input terminals to display a PC screen for the first time or when you change the setting of the PC.
  • Page 7 nSETUP OSD H-POSITION Adjusts the horizontal display position of menu screen. OSD V-POSITION Adjusts the vertical display position of menu screen. MONITOR Select the installation direction of the monitor. LANDSCAPE ...Horizontal orientation PORTRAIT ...Vertical orientation LANGUAGE Sets the display language for the menu screen. HDMI AUTO VIEW When ON is selected, the screen size is adjusted automatically according to the screen size control signal...

  • Page 8: Ndual Screen Display

    Menu Items nENLARGE (PC input) ENLARGE H Sets the number of screen splits (number of monitors) in the longest direction used for the enlargement. (See page 9.) ENLARGE V Sets the number of screen splits (number of monitors) in the shortest direction used for the enlargement.
  • Page 9 nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to five monitors can be aligned in both the longest and shortest directions. • Each monitor displays enlarged views of separated images. (Example) Longest direction: 2 monitors Shortest direction: 2 monitors...

  • Page 10: Adjustments For Pc Screen Display

    Menu Items (5) INPUT Specifies the input mode at power-on. When not specifying, the screen at the previous power-off appears. Input modes displayed on “PC1/AV1” depend on DVI SELECT settings. Input modes displayed on “PC2/AV2” depend on HDMI SELECT settings. Input modes displayed on “PC4/AV3”...

  • Page 11: Initialization (Reset)/Functional Restriction Setting

    Initialization (Reset)/Functional Restriction Setting You can return the settings to their factory-preset values and restrict operations. SIZE 1. After pressing for about 5 seconds, press , and in that order. FUNCTION ALL RESET ADJUSTMENT LOCK RS-232C/LAN UNLOCKED OSD DISPLAY TEMPERATURE ALERT STATUS ALERT 2.

  • Page 12: Controlling The Monitor With A Pc (Rs-232C)

    Controlling the Monitor with a PC (RS-232C) You can control this monitor from a PC via RS-232C (COM port) on the PC. You can also connect multiple monitors via a daisy chain by using a PC. By assigning ID numbers to each monitor (see page 13), you can make input mode selection/adjustment or can check the status of a specific monitor.
  • Page 13 nResponse code format When a command has been executed correctly Return code , 0A A response is returned after a command is executed. * If an ID number has been assigned Space (20 ID number of responding monitor When a command has not been executed Return code , 0A * If an ID number has been assigned...
  • Page 14 Controlling the Monitor with a PC (RS-232C) nCommands for ID control The command examples shown on this page assume the following connection and ID number set up. ID number: 1 ID number: 2 IDST ... A monitor receiving this command sets its own ID number in the parameter field.
  • Page 15 nRepeater control This system has a function to allow setting of multiple monitors connected in a daisy chain using a single command. This function is called repeater control. You can use Repeater control function without assigning ID numbers. [Example] Set 1 Set 2 * If monitors are connected as shown above, you can execute a command like “Set all monitors’...

  • Page 16: Rs-232C Command Table

    Controlling the Monitor with a PC (RS-232C) RS-232C command table How to read the command table Command: Command field (See page 12.) Direction: W When the “Parameter” is set in the parameter field (see page 12), the command functions as described under “Control/Response Contents”.

  • Page 17: Picture Menu

    PICTURE menu Function Command Direction AUTO AGIN CONTRAST CONT BLACK LEVEL BLVL TINT TINT COLORS COLR SHARPNESS SHRP ADVANCED FLESH TONE FLES (When the input 3D-NR TDNR mode is AV.) MPEG-NR MPNR 3D-Y/C YCSP C.M.S.-HUE CMHR CMHY CMHG CMHC CMHB CMHM CRST C.M.S.-...

  • Page 18: Setup Menu

    Controlling the Monitor with a PC (RS-232C) SETUP menu Function Command OSD POSITION ON THE LONGEST OSDH SIDE OSD POSITION ON THE SHORTEST OSDV SIDE MONITOR STDR LANGUAGE LANG HDMI AUTO VIEW HDAW Power On Delay PWOD STANDBY MODE STBM RS-232C/LAN SELECT CTLS RS-232C/LAN COMMAND...
  • Page 19 ENLARGE menu (When the input mode is PC) Function Command Direction ENLARGE MODE EMAG EMHV BEZEL WIDTH WIDTH OF THE BEZH SHORTER SIDE WIDTH OF THE BEZV LONGER SIDE IMAGE POSITION (M x N) EPHV IMAGE POSITION (2 x 2) EPOS IMAGE POSITION (3 x 3) EPOS...
  • Page 20 Controlling the Monitor with a PC (RS-232C) PIP/PbyP menu Function Command PIP MODES MWIN PIP SIZE MPSZ PIP POS THE LONGEST MHPS DIRECTION THE SHORTEST MVPS DIRECTION PIP V/H-POS MPOS PIP BLEND MWBL PIP SOURCE MWIP SOUND CHANGE MWAD MAIN POS (Main screen) MWPP PbyP2 POS (Sub screen) MW2P...

  • Page 21: Controlling The Monitor With A Pc (Lan)

    Controlling the Monitor with a PC (LAN) Your monitor can be connected to a LAN allowing you to control it from a PC on the LAN. You can also configure the monitor to send e-mail notification when it has a problem. The connection requires a commercially available LAN cable (UTP cable, Category 5, straight through).
  • Page 22 Controlling the Monitor with a PC (LAN) ■ To set from a PC When the monitor is connected to a PC, LAN settings can be configured via PC. Set up process (1) Connect your monitor to a PC (2) Specify the PC’s IP address (3) Configure the monitor’s LAN settings (1) Connecting your monitor to a PC Connect a commercially available crossover LAN cable (UPT cable, Category 5) to the LAN port on the PC and this...

  • Page 23: Controlling With A Pc

    5. Click on “LAN SETUP” under NETWORK. 6. Specify the “DHCP CLIENT”, “IP ADDRESS”,etc. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”. To set the address manually, set this to “OFF”. IP ADDRESS If the DHCP CLIENT is set to “OFF”, specify an IP address.
  • Page 24 Controlling the Monitor with a PC (LAN) ■ INFORMATION Information about this monitor appears. ■ CONTROL You can control the operations corresponding to the buttons POWER INPUT SIZE ) on the remote control unit. (See page 3.) TIPS • In standby mode, Power ON is the operation available. ■ ADJUSTMENT You can adjust these settings which are also available on the monitor’s menu.
  • Page 25 ■ NETWORK (LAN SETUP) This screen allows you to set the settings necessary when the monitor is connected to a LAN. DHCP CLIENT If your LAN has a DHCP server and you wish to obtain an address automatically, change this setting to “ON”. To set the address manually, set this to “OFF”.
  • Page 26 Controlling the Monitor with a PC (LAN) ■ NETWORK (GENERAL) This screen allows you to specify the general LAN settings. MONITOR NAME Specify a name for this monitor as it should appear on the Internet Explorer screen. AUTO LOGOUT TIME Specify the time (in minutes) to elapse before automatically disconnecting this monitor from the network.
  • Page 27 ■ MAIL (RECIPIENT) This screen allows you to specify the recipients of the e-mail sent periodically or when the monitor has an error. RECIPIENT E-MAIL ADDRESSES Specify the e-mail addresses to send error notification e-mail CONDITION Specify the conditions to send mails. When you check PERIODICAL, specify the date and time to send the mails in the PERIODICAL setting.
  • Page 28 Controlling the Monitor with a PC (LAN) ■ S ERVICE & SUPPORT (URL INFORMATION) You can display a specific URL in the URL INFORMATION field on the INFORMATION screen when an error occurs in the monitor. (See page 24.) URL INFORMATION Enter a URL to display when an error occurs on the monitor. Up to 64 alphanumeric characters or symbols can be used.
  • Page 29 M E M O...
  • Page 30 PN-S525 G EN08G(1)

Table of Contents