[B] Removal; [C] Reassembling - Hoshizaki IM-30CWNE Service Manual

[b] REMOVAL

BRACKET COVER
Push the two pawls and remove the bracket
cover.
SWITCH
Pull out the switch, holding the rubber leads
cap. Handle with care.
SWITCH ACTUATOR
Insert a flat blade screwdriver and wrench it
slightly to pull out the switch actuator. Handle
with care to prevent damage to the cam
surface of the actuator.
DETECTOR
Push out the detector, holding the switch
actuator.

[c] REASSEMBLING

SWITCH ACTUATOR
Insert the lower shaft and push it along the U
notch. Check that the switch actuator moves
free.
SWITCH & BRACKET COVER
Place the switch lever first, and then attach
the switch in position. Insert the guide and
push the bracket cover to lock.
36
Fig. 5