Pump Motor; Water Valve - Hoshizaki IM-30CWNE Service Manual

9. PUMP MOTOR

1) Unplug the icemaker or disconnect the power source.
2) Remove the top panel and front panel.
3) Disconnect the pump motor leads in the wiring channel.
4) Unscrew and remove the pump motor from the bracket.
5) Disconnect the pump suction and discharge tubings.
6) Install the new motor in the reverse order of the removal procedure.
7) Plug in the icemaker or connect the power source, and check for leaks.
8) Replace the panels in their correct positions.

10. WATER VALVE

1) Close the water supply tap.
2) Unplug the icemaker or disconnect the power source.
3) Remove the top panel and front panel.
4) Disconnect the receptacle (leads) from the water valve.
5) Remove the valve outlet tubing by releasing the clamp.
6) Remove the inlet hose and water valve.
7) Install the new valve in the reverse order of the removal procedure.
8) Open the water supply tap.
9) Plug in the icemaker or connect the power source.
10) Check for leaks.
11) Replace the panels in their correct positions.
Note: When replacing parts, disassemble as shown in Fig. 7 and replace the defective
parts.
78