Clock Functions - Zanussi ZOP37901XU User Manual

HEAT-UP INDICATOR
When the oven function operates, the bars in the
display appear on by one when the temperature

CLOCK FUNCTIONS

CLOCK FUNCTIONS TABLE
Clock function
TIME OF DAY
DURATION
END
TIME DELAY
MINUTE MINDER
00:00 COUNT UP TIMER
SETTING AND CHANGING THE TIME
After the first connection to the mains, wait until the
display shows and "12:00". "12" flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set the
minutes.
The display shows
flashes.
3. Press or to set the current minutes.
4. Press to confirm or the set time of day will
be saved automatically after 5 seconds.
The display shows the new time.
To change the time of day press
again until the indicator for the time of day
flashes in the display.
SETTING THE DURATION
1. Set an oven function.
8
To show or change the time of day. You can change the time
of day only when the oven is off.
To set how long the oven operates. Use only when an oven
function is set.
To set when the oven turns off. Use only when an oven func-
tion is set.
Combination of DURATION and END function.
Use to set a countdown time. This function has no effect on
the operation of the oven. You can set the MINUTE MINDER
at any time, also if the appliance is off.
If you do not set any other clock function the COUNT UP TIM-
ER automatically monitor how long the oven operates.
It is on immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions: DU-
RATION, END.
and the set hour. "00"
again and
in the oven increases and disappear when it
decreases.
Application
2. Press again and again until
flash.
3. Press or to set the minutes and then the
hours. Press to confirm.
When the set Duration time ends the signal sounds
for 2 minutes. and time setting flash in the
display. The oven turns off automatically.
4. Press any button or open the oven door to stop
the signal.
5. Turn the knob for the oven functions to the off
position.
SETTING THE END
1. Set an oven function.
2. Press again and again until
flash.
3. Press or to set the hours and then the
minutes. Press
starts to
starts to
to confirm.