MicroScanner Series Cable Verifiers
Users Manual
Viewing Details for a Wire Pair
To see details for each wire pair, use
through the screens.
In this mode, the tester continuously tests only the wire pair
you are viewing.
Figures 17 and 18 show examples of these screens.
26
or
to move
Notes
On the results details screens, shorts are shown
only when they are between wires in a pair.
When there is a short, the far-end adapter and
the mapping of the unshorted wires are not
shown.
Figure 17. Details for a Short
2
(MicroScanner
screen shown)
Short on pair
1,2 at 29.8 m.
EGK18.EPS