Zummo Z40 NATURE User Manual page 34

6.9. SAFETY SYSTEMS
The machine has various safety systems:
1 If the front cover is not assembled or is improperly assembled, the display will show
an Error message with the area of the front cover flashing.
2 If the tray is not assembled or is not in place, the machine will not operate and the
display will show an Error message by displaying a flashing dark tray.
3 If one of the side covers is incorrectly positioned, the machine will not work and the
display panel will show Error. The corresponding side cover will appear shaded
intermittently.
4 If one of the containers/chutes is incorrectly positioned, the machine will not work and
the display panel will show Error. The corresponding container/chute will appear
shaded intermittently.
5 If the exterior basket is incorrectly positioned, the machine will not work and the
display panel will show Error. The basket will appear shaded intermittently.
6 If for any reason the machine gets blocked during operation, after a few seconds the
motor will stop automatically and the display will show an Error message with a faulty
flashing icon, until the cause of the blockage is removed.
7 Thanks to a thermal protection system in the motor, in the event of overheating the
machine will stop and the display will show an Error message and a thermometer
icon / Error message with a faulty flashing icon. In this case, please wait
approximately 10 minutes to allow the motor temperature to decrease.
34