Download Print this page
Champion Global Power Equipment 200915 Quick Start Manual

Champion Global Power Equipment 200915 Quick Start Manual

1200w portable generator

Advertisement

Quick Links

WARNING:
Read the ENTIRE operator's manual to become familiar with the
features of the product before operating.
Failure to operate the product correctly can result in damage to
the product, personal property and cause serious injury or even death.
quick st rt
QUICK START GUIDE • GUÍA DE INICIO RÁPIDO
1200W Portable Generator
Generador Portátil de 1200W
ADVERTENCIA:
Lea el manual del operador COMPLETAMENTE para familiarizarse
con las características del producto antes de operarlo.
La falla en operar el producto correctamente puede resultar en daños al
producto, propiedad personal y causar lesiones graves o incluso la muerte.
www.championpowerequipment.com
All Rights Reserved. / Todos los derechos reservados.
200915
© Champion Power Equipment 2021.

Advertisement

loading

Summary of Contents for Champion Global Power Equipment 200915

  • Page 1 QUICK START GUIDE • GUÍA DE INICIO RÁPIDO 200915 1200W Portable Generator Generador Portátil de 1200W WARNING: ADVERTENCIA: Read the ENTIRE operator’s manual to become familiar with the Lea el manual del operador COMPLETAMENTE para familiarizarse features of the product before operating.
  • Page 2 Set Up / Montaje Open shipping carton. Assembly > Unboxing Abra el cartón de envío. Montaje > Desempacando Add oil. Assembly > Add Engine Oil. Recommended: 10W-30, up to 11.8 fl. oz. (350 ml) DO NOT overfill. 10W-30 Agregue aceite. Montaje >...
  • Page 3 Start Up / Arrancar DO NOT plug in any electrical devices. NO enchufe ningún aparato electrónico. NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON! NUNCA ENCIENDA UN GENERADOR CON APARATOS ELECTRONICOS ENCHUFADOS O ENCENDIDOS Turn the fuel valve “ON”. Abra la válvula de combustible a “ENCENDIDO.”...
  • Page 4 Start Up / Arrancar Pull the recoil to start the engine. Jale el arrancador retráctil para encender el motor. Move the choke lever to the “RUN” position. Mueva la palanca del ahogador en la posición “CORRER.” Plug in. Operation > Connecting Electrical Loads. Enchufe.