Bretford TechGuard Assembly & Installation

TechGuard
Assembly & Installation
The equipment is to be secured to the building structure before
|
operation.
Consult with a structural engineer or suitable professional prior to
|
installation.
Unit must be secured to floor and/or anchored to the wall in compliance with
|
local building code.
Two people required for lifting during assembly.
|
Nothing may be placed on top of assembled unit.
|
The socket-outlet shall be installed near the equipment and shall be easily accessible.
|
Installation Instruction states the product is to be secured to building before operation.
|
Elevated Operating Ambient - Consideration should be given to installing the lockers in an
|
environment compatible with the maximum ambient temperature Tma of 40°C.
Reduced Air Flow - Instructions indicated to not block the ventilation openings so proper air flow
|
required for safe operation of the equipment is not compromised.
Mechanical Loading - Mounting of the equipment in the locker should be such that a hazardous
|
condition is not achieved due to uneven mechanical loading.
T-25 Bit
Bubble Level
Powered or Manual Bit Driver
Bit Extension
TechGuard Charging Locker 10-Bay 031-10478 Rev 1.0
Charging Locker 10-Bay
™
Tools Required Estimated Time Required People Required
30 Min. Two (2)