Bretford 1-Bay User Manual

Bretford 1-Bay User Manual

Techguard charging lockers

Advertisement

Quick Links

®
TechGuard
Charging Lockers
User Guide
ver. L15TGUGV1

About Your Product

What's in the Box

1-Bay
TechGuard Charging Locker 1-Bay
Region-specific power cord(s)
2 Administration keycards, programmed for this TechGuard Charging Locker
1 user-applied instruction decal
1 Warranty hang-tag
1 Bretford Warranty Statement
"What's in the Box" page
5-Bay
TechGuard Charging Locker 5-Bay
Region-specific power cord(s)
2 Administration keycards, programmed for this TechGuard Charging Locker
1 user-applied instruction decal
1 Warranty hang-tag
1 Bretford Warranty Statement
"What's in the Box" page
10-Bay
2 TechGuard Charging Locker 5-Bay
1 locker stacking bracket
1 24-inch mounting pedestal with assembly instructions
2 IEC to IEC power cables
1 IEC Y-Plug power adapter
Region-specific power cord(s)
2 Administration keycards, programmed for this TechGuard Charging Locker
1 user-applied instruction decal
1 Warranty hang-tag
1 Bretford Warranty Statement
"What's in the Box" page

Before You Begin

Important Safety Notice
Each TechGuard Charging Locker 10-Bay unit includes a floor mounting kit and wall anchor. The
equipment is to be secured to the building structure before operation.
Additional safety information can be found in the
section of this User Guide.
Administration Keycards
Included with the TechGuard Locker are two administration keycards, one (1) access and one (1)
reset. These cards only allow access to the TechGuard Locker in which they are included.
Please pay close attention to the location of these keycards and keep them in a secure location.
For additional information view the
Administration Keycard
section of this User Guide.

Product Registration

Please take a few minutes to
register your product
with Bretford. With registration, you will be
able to:
Order additional sets of administration cards. (One additional set of administration cards is
available at no cost with product registration.)
Order mounting hardware for 1-bay and 5-bay models.
Receive product updates and support.

Product Overview

About Your New TechGuard Charging Locker
®
Available in 1-Bay, 5-Bay, and 10-Bay models, the Bretford
TechGuard Charging Locker
provides individual locking storage and charging for your mobile devices. Each bay of the locker
can accommodate up to two (2) USB devices and one (1) AC device.
1. TechGuard Charging Locker (5-Bay Unit Pictured)
2. Digital Keypad
3. Charging Bay
4. JumpStart access

Mounting TechGuard Lockers

TechGuard Charging Lockers can be mounted or anchored to a floor, wall, counter, or under a
counter.
1-Bay
Surface Mount, Under-Counter Mount
Surface and under-counter mounting hardware
available at no charge by contacting Bretford.
If you have
registered your product
make this request online.
5-Bay
Surface Mount, Wall Mount
Surface and wall mounting hardware available
at no charge by contacting Bretford.
If you have
registered your product
make this request online.
10-Bay
Floor Mount, Wall Anchor
The 10-Bay TechGuard Locker models
includes a floor mounting and wall anchor kit.
WARNING:The equipment is to be secured to
the building structure before operation.
, you can
, you can

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 1-Bay and is the answer not in the manual?

Questions and answers

Summary of Contents for Bretford 1-Bay

  • Page 1 Product Overview About Your New TechGuard Charging Locker ® Available in 1-Bay, 5-Bay, and 10-Bay models, the Bretford TechGuard Charging Locker provides individual locking storage and charging for your mobile devices. Each bay of the locker can accommodate up to two (2) USB devices and one (1) AC device.
  • Page 2 Each TechGuard locker includes two administration keycards, one (1) access and one (1) reset. Each pair of cards will only allow access to the TechGuard Locker in which they are included. They cannot be shared with multiple 1-Bay, 5-Bay or 10-Bay units. Always keep your keycards in a secure location. TechGuard Accessories...
  • Page 3 Important Each 10-Bay TechGuard Locker requires a dedicated 15 A circuit. Understanding the Keypad and LEDs The Digital Keypad To the left of each TechGuard Locker bay, you'll find the digital keypad. Each keypad offers buttons 0-9, a Lock button and an Unlock button. The Lock button and Unlock buttons also include LEDs to indicate the current status of an individual bay.
  • Page 4 Bretford's inspection, will, at Bretford's option be either repaired or replaced with the same or functionally equivalent product, without charge to you, the end customer. This warranty is inapplicable where, in the judgement of Bretford, the defect is attributable to abnormal wear, misapplication, abuse, accident, misuse, modification or damage after shipment from Bretford's facility, including damage caused by your failure to properly maintain the item.
  • Page 5 UL Listing The TechGuard Lockers have been LISTED to UL 60950-1 Safety of Information Technology Equipment. Please contact Bretford Customer Care for a copy of our Certificate of Compliance. FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
  • Page 6 owners.

This manual is also suitable for:

10-bay5-bay

Table of Contents