Epson Perfection 636U User Manual page 35

4. Open the scanner software (EPSON TWAIN).
Windows:
a. Click the
b. Select
c. Click the
d. Click
e. Click the
main window opens.
iMac:
Click the
EPSON TWAIN main window opens.
5. Make the appropriate selections for your scan. (If you're scanning a positive
transparency, such as a 35 mm slide, select
box. If you're scanning a negative transparency, such as 35 mm film, select
for neg.Film
6. Click the
the preview area on the right side of your screen.
7. Make the changes you want to adjust the image, then click the
scan your image.
The operate light on the top of the scanner blinks for several seconds while it's
scanning. In a few moments, the scanned image is imported into Adobe
PhotoDeluxe. (On the iMac, you see a dialog box that lets you name your file and
add it to an EasyPhoto gallery, or save it to a folder on your hard disk.) You must
close EPSON TWAIN to view the application window.
If the operate light continues to blink, it may indicate an error condition. See
"Scanner operate light" on page 37 for more information.
30
Get & Fix Photo
.
Scanners
tab.
1 Scanners
.
Choose Scanner
tab, then click the
2 Mode
icon at the top of the Scanners button on the toolbar. The
in the Image Type box.
Preview icon to preview your scan. You see a preview of your scan in
Don't leave documents, especially photographs, on the
document table for long periods of time. They may stick to the
glass or deteriorate from the warmth of the scanner.
button; then click
Get Photo
icon. The EPSON TWAIN
Custom
TPU for pos.Film
.
in the Image Type
TPU
button to
Scan