Connect The Scanner To Your Computer - Epson Perfection 636U User Manual

Connect the Scanner to Your Computer

If you are connecting to a PC, Windows 98 must be preinstalled on your system.
1. Make sure the scanner, computer, and any USB devices connected to your
computer are turned off. The scanner is off when the Poperate button is up
(not pushed down below the surface of the front panel).
2. Locate the USB cable that came with your scanner.
3. Plug the square connector
on the back of the scanner. Then plug the flat connector
port on your computer or USB hub.
4. Plug in the power cables for your computer, scanner, and other USB devices.
10
Your system may not work correctly if you use a USB cable
other than the one supplied by EPSON or if you connect your
scanner through more than one hub.
on the USB cable into the USB connector
into the USB