P2 Usb Interface; Description; Box Contents; Mounting - Progeny P2 System Hardware Manual

P2 USB Interface

Description

The P2 USB Interface provides a simple means for Doors Express to communicate with the P2 controllers. The
software designed to automatically detect this interface and start using it.
The interface is powered from the USB interface.
The interface also provides a convenient place to connect a desktop reader.

Box Contents


1 x P2 USB Interface

1 x UK standard surface mount single back box

1 x 3 metre USB lead

2 x screws

Mounting

The USB Interface should be mounted on the special surface mount back box which is provided.

Connections

The USB cable is connected from the host PC using the USB socket at the bottom of the P2 USB Interface
(before connecting the device for the first time it is important to install Doors Express first which will put the
drivers in place ready).
Figure 14
20