Click "finish" to confirm the additions to the system or click "cancel" to discard the additions to the system.
You can choose to run the wizard again at any time by clicking on the Doors Express System Manager icon and
clicking the "start the setup wizard" link.
Test the cards / fobs
This completes the basic P2 system setup. By following the instructions above you will now have a simple door
access control system allowing access for a single valid card. Because we enabled the card and gave it an
access level "All Doors" the card will be valid at all the doors on the system.
To see how to add more doors, cards and to control access permissions see the "Doors Express Software
Manual". This can be accessed from the help menu of the Doors Express software.
14