P2 Reader; Box Contents; Description; Power - Progeny P2 System Hardware Manual

P2 Reader

Box Contents


1 x P2 Reader

1 x stainless steel facia

1 x UK standard surface mount single gang back box

2 x security screws

1 x driver bit for security screws

Description

The P2 Reader is a passive RFID (Radio Frequency Identification) proximity reader for use with the Progeny P2
system. The P2 Reader is weather protected and suitable for both indoor and outdoor use.

Power

The P2 Reader uses 12V DC and power is taken from the positive and negative connections of the Reader
terminals on the P2 Controller board.
Front View of P2 Reader
Figure 10
17