Use The Setup Wizard To Scan For Connected Doors - Progeny P2 System Hardware Manual

Once installation is complete, the login screen for Doors Express will appear.
Simply enter the default password "654321" and press <Enter>. The software will detect the fact that the system
is being started for the first time and automatically start the "Setup Wizard".

Use the setup wizard to scan for connected doors

The wizard will also at this stage ask you to connect your P2 USB adapter for the first time.
(When connecting the USB cable to the PC, the system will automatically install the drivers for the USB network
device, so wait 20 seconds before continuing.)
9