P2 Reader
Box Contents
1 x P2 Reader
1 x stainless steel facia
1 x UK standard surface mount single gang back box
2 x security screws
1 x driver bit for security screws
Description
The P2 Reader is a passive RFID (Radio Frequency Identification) proximity reader for
use with the Progeny P2 system. The P2 Reader is weather protected to IP66 and
suitable for both indoor and outdoor use.
Power
The P2 Reader uses 12V DC and power is taken from the positive and negative
connections of the Reader terminal block on the P2 Controller board.
Front View of P2 Reader
Figure 3
5