Table of Contents
Advertisement
The following are optional items for installation.
ITEM
1
(Optional) Connecting a UPS
2
(Optional) Connecting the USB LCM
(Optional) Wake-on-LAN / Wake-
3
on-SAS
3.2. Installing Disk Drives into the Trays
Open the storage box, the first step you have to install the disk drive. This section describes
how to remove and install the disk drive into the tray. Please refer to the chapter 3.4,
the Trays into the System
TIP
Please insert any one of the first four hard drives, the event log can be saved
and displayed at the next system startup. Otherwise, the event log cannot
be saved.
Key Components of the Disk Drive Tray
The following content illustrates the key components of SFF disk drive trays.
Installing the System Hardware
29
© 2021 QSAN Technology, Inc. All rights reserved.
www.qsan.com
Table 3-2
Optional Items for Installation
TASK
Chapter 3.10
Chapter 3.11
Chapter 3.12
after installing the slide rails.
Hardware Manual
WHERE TO FIND THE
DETAIL PROCEDURE
Official
Document
XCubeFAS 2026
Installing
Advertisement
Table of Contents
