Installing camera
The installation procedure is applicable only for systems shipping with a nontouch display configuration.
1. Connect the camera cable.
2. Insert the camera microphone module into the slot on the display assembly.
3. Affix the tape to secure the camera module.
4. Install the
display
bezel.
5. Install the
display
assembly.
6. Install the
display
hinges.
7. Install the
display
panel.
8. Install the
WLAN
card.
9. Install the
WWAN
card.
10. Connect the battery cable to the connector on the system board.
11. Install the
base
cover.
12. Follow the procedure in
NOTE:
The two conductive tape pieces must be removed and then reattached when replacing the camera module.
38
Disassembly and reassembly
After working inside your
computer.