1. Follow the procedure in
2. Remove the
base
cover.
3. Disconnect the battery cable from the connector on the system board.
4. Remove the
WLAN
card.
5. Remove the
WWAN
card.
6. Remove the
display
assembly.
7. Remove the
display
bezel.
8. Remove the
hinge
caps.
9. To remove the display panel:
a. Remove the two (M2.0 x 2.0) screws on the panel [1].
b. Lift the top edge of the display panel [2] and flip the display panel over.
c. Peel off the display connector adhesive strip from the display panel [1].
d. Peel off the Mylar tape securing the display cable on the back of the display panel [2].
e. Lift the metal tab and disconnect the display cable from the back of the display panel [3,4].
Before working inside your
computer.
Disassembly and reassembly
35