Name Zones And Assign Devices To Zones/Groups/Sets - C-TEC CAST XFP Commissioning & Programming Quick Start Manual

CAST XFP ANALOGUE ADDRESSABLE FIRE ALARM PANEL

4.6 Name Zones and Assign Devices to Zones/Groups/Sets

4.6.1 Name the Zones
A Zone is a geographical location of the protected premises and may also be a fire compartment.
To make the system understandable to the user, you should name all the Zones.
The following example uses the Zone Config tab option to show the results of editing Zone names.
FIG.3 – Zone Config Window
Enter the desired name in the Zones Description column in the Zone Config window (see FIG.3).
The Zone name is limited to a maximum of 14 characters (including spaces) and there are a maximum
of 16 or 32 Zones (dependant on CAST XFP panel model).
Commissioning/Programming Quick Start Guide  Approved Document No. DFU5020010 Rev 4  Page 11 of 16