Advertisement
FOREWORD
12
Type 3
Disconnection
1.
Hold the mouthpiece of the tightening portion and push the
body (2) in straight until sliding prevention ring (1) contacts
surface (a) of the hexagonal portion at the male end.
2.
Hold in the condition in Step 1 and push until the cover (3)
contacts surface (a) of the hexagonal portion at the male end.
3.
Hold in the condition in Step 1, and pull out the whole body (2) to
disconnect it.
Connection
1.
Hold the mouthpiece of the tightening portion and push the
body (2) in straight until the slide prevention ring (1) contacts
surface (a) of the hexagonal portion at the male end to connect the
body.
00-30
PUSH-PULL COUPLER
00
00
00
WA500-6
Advertisement
