Advertisement
FOREWORD
Handling Connectors Used for Engines
The following engines use the connectors described in this section.
•
95E-5
•
107E-1
•
114E-3
•
125E-5
•
140E-5
•
170E-5
•
12V140E-3
★ Your machine has a 140E-5 diesel engine.
Slide Lock Type
FRAMATOME-3, FRAMATOME-2
★ 95 – 170, 12V140 engines
•
Pressure sensors and NE speed sensor
Engine
125, 170, 12V140
125, 170, 12V140
95, 107, 114
95 – 170, 12V140
125, 170, 12V140
Disconnect connector (1) according to the following procedure.
1.
Slide lock (L1) to the right.
2.
While pressing lock (L2), pull out connector (1) toward you.
3.
Even if lock (L2) is pressed, connector (1) cannot be pulled toward
you if part A does not float. In this case, float part A with a small
screwdriver while pressing lock (L2), and then pull out
connector (1) toward you.
WA500-6
HANDLING ELECTRIC AND HYDRAULIC EQUIPMENT
Sensor
Intake air pressure sensor in intake manifold: PIM
Oil pressure sensor: POIL
Oil pressure switch
Ne speed sensor of flywheel housing: NE
Ambient pressure sensor: PAMB
00
00
00-21
Advertisement
