Advertisement
FOREWORD
Connector
SUMITOMO-3
•
Pull the connector straight up.
Turn-housing Type (Round Green Connector)
★ 140 engine
★ Intake air pressure sensor in intake manifold (CANNON-04):
PIM etc.
1.
Disconnect connector (6) according to the following procedure.
A. Turn housing (H1) in the direction of the arrow.
★ When the connector is unlocked, housing (H1) becomes
heavy to turn.
B. Pull out housing (H1) in the direction of the arrow.
★ Housing (H1) is left on the wiring harness side.
2.
Connect the connector according to the following procedure.
A. Insert the connector to the end, while setting its groove.
B. Turn housing (H1) in the direction of the arrow until it clicks.
00-24
HANDLING ELECTRIC AND HYDRAULIC EQUIPMENT
Sensor
Speed sensor of fuel supply pump: G
00
WA500-6
Advertisement
