Advertisement
FOREWORD
Type 2
Disconnection
1.
Hold the mouthpiece of the tightening portion and push body (2) in
straight until sliding prevention ring (1) contacts contact
surface (a) of the hexagonal portion at the male end.
2.
Hold in the condition in Step 1 and turn the lever (4) to the right
(clockwise).
3.
Hold in the condition in Steps 1 and 2 and pull out the whole
body (2) to disconnect it.
Connection
•
Hold the mouthpiece of the tightening portion and push body (2) in
straight until sliding prevention ring (1) contacts surface a of the
hexagonal portion at the male end to connect the body.
WA500-6
PUSH-PULL COUPLER
00
00
00
00-29
Advertisement
