Advertisement
FOREWORD
Pull Lock Type
PACKARD-2
★ 95 – 170, 12V140 engines
•
Temperature sensors
Engine
Intake air temperature sensor in intake
manifold: TIM
Fuel temperature sensor: TFUEL
95 – 170, 12V140
Oil temperature sensor: TOIL
Coolant temperature sensor: TWTR, etc.
•
Disconnect the connector by pulling lock (B) (on the wiring
harness side) of connector (2) outward.
Push Lock Type
★ 95, 107, 114 engines
Connector
BOSCH0-03
Fuel pressure sensor in common rail
Disconnect connector (3) according to the following procedure.
•
While pressing lock (C), pull out connector (3) in the direction of
the arrow.
★ 114 engine (see graphic)
•
If the lock is on the underside, use flat-head screwdriver [1] since
you cannot insert your fingers.
★ 107 engine (see graphic)
00-22
HANDLING ELECTRIC AND HYDRAULIC EQUIPMENT
Sensor
Sensor
00
00
WA500-6
Advertisement
