Connecting The Cable; Connecting The Bi-Directional Parallel Cable; Connecting The Bidirectional Parallel Cable; Connecting The Scsi Cable - Epson ES-300C User Manual

Connecting the Cable

These procedures describe connecting the bidirectional parallel
adapter cable, then the SCSI adapter cable.

Connecting the Bi-directional Parallel Cable

Follow these steps to connect the cable to your bidirectional
adapter card. This cable came in your Epson Scanner Interface
kit.
1.
Make sure both the scanner and computer are turned off.
2.
Connect the 25-pin end of the cable to the computer, then
tighten the screws on the sides of the connector.
3.
Connect the 36-pin end of the cable to the scanner; then fasten
the connector with the clamps on the sides of the connector.
4.
Turn on your computer and scanner.
You are now ready to install Epson TWAIN.
Connecting the SCSl Cable
The SCSI interface on your computer allows you to connect up
to eight devices, including the computer, in a daisy-chain
arrangement. Only the first SCSI device is connected to the
computer; each of the other devices is connected to the
previous device.
1. Make sure both the scanner and computer are turned off.
2. If the Epson scanner is your only SCSI device, attach the
50-pin connectors to the scanner and your computer.
Fasten the connectors with the clamps on the sides of the
connector.
installing the Interface Card
1-7