What You Need To Use Epson Twain; Computer - Epson ES-300C User Manual

If you are using Windows 3.0 or 3.1 with applications that
support TWAIN, the Epson Scanner Utility Setup program for
Windows installs everything you need. Just follow the
instructions in Chapter 3 for installing Epson TWAIN.
If you do not have Windows, you can still install the Epson
Scanner Utility to support the bidirectional parallel or Adaptec
SCSI adapters using the INSTALL program from the DOS
prompt. Read the README file supplied on the Epson Scanner
Utility diskette for more information about installing the Epson
Scanner Utility from DOS
Note
If you are using the Adaptec SCSI adapter, you also received an
Adaptec ASPI™ DOS Manager diskette. You will need this
diskette to install SCSI support for either Epson TWAIN or the
Epson Scanner Utility for DOS.

What You Need to Use Epson TWAIN

Epson TWAIN supports any TWAIN-compliant application
using Windows 3.0 or higher. Before you can use Epson
TWAIN, you'll need the components described here.

Computer

Your computer needs the following configuration to support
Epson TWAIN:
(ISA) bus, or an IBM PS/2™ or compatible computer
Microsoft Windows version 3.0 or higher
Introduction
2
®
AT™