Running Scantest - Epson ES-300C User Manual

Insert the Epson Scanner Utility diskette in your diskette
16.
drive. As Setup installs Epson TWAIN, it displays
percent of
Setup Successful!
17. If you chose to change your CONFlG.SYS file yourself, make
the changes now, using the information in the
CONFIG.ADD file.
18. Reboot your computer.
Running SCAN TEST
SCANTEST is a utility that bypasses any other software
program to test just the physical connection to the scanner. You
can run SCANTEST from within Windows or at the DOS
prompt.
1. Make sure both your scanner and your printer are turned
2.
Place
3. To start SCANTEST from the Run option on
Manager's File menu, type
C:\WINDOWS\TWAIN\SCANTEST
To run SCANTEST from the DOS prompt, change to the
TWAIN subdirectory in your Windows directory and type
SCANTEST.
4. Press
Enter
interface, and drivers are working properly, the scanner
scans the image and displays it on your screen.
Press any key to quit SCANTEST.
5.
2-8 installing Epson TWAIN
installation is complete. Then it displays:
the
an image on
(or select
OK
the scanner.
following:
the
in Windows). If your scanner,
what
on.
Program
the