If you already have an Adaptec SCSI device, select the second
option to use your existing SCSI support software.
6.
Select
Continue.
Check the back of the scanner for the Scanner SCSI ID
7.
number. If it is not 2, type the new value in the Scanner
SCSI ID field.
Select
8.
Continue.
If your path for your start-up files is different from the
9.
displayed default, type the correct path, such as:
c : \
Select
10.
Continue.
11. If your path is different from the displayed default, type the
correct path for Windows, such as:
Select
12.
Continue.
Path screen with this path:
Path A:\
13. Change the path for the ASPI diskette, if necessary.
14. Insert the Adaptec ASPI DOS Manager diskette in your
diskette drive.
15. Select
Continue.
program prompts you to insert the Epson TWAIN diskette
in your diskette drive.
You see the Enter Scanner SCSI ID screen.
You see the Enter MS-DOS Path screen.
You see the Enter Windows Path screen.
The Setup program displays the Enter ASPI
After installing the ASPI files, the Setup
Installing Epson TWAIN
2-7