Select Target Device from the Edit pull down menu. You see
the Target Device screen:
To Add a Target Device
Rather than modifying the Epson-supplied target devices, you
will probably want to create your own definitions. Follow these
steps to add a target device:
1. Select a predefined target device similar to the device you
want to define.
2. Type the name you want to assign to your target device over
the name displayed in the Target Device Setting Name
dialog box.
3. Select the values you want to assign to the target device,
using the information in the following table. These options
are described in more detail in your scanner manual.
Using TWAIN
3-15