Adjusting The Brightness; Adjusting The Magnification - Epson ES-300C User Manual

To define a new scanning area, move the cursor to the edge of
the box until you see a double arrow; then hold
button down while you drag
position. To reselect
scanning area but within
To move the scanning area, move the cursor to the center of
scanning area. The cursor becomes a hand icon. Hold the
mouse button down and drag the box to a different position.
When the image is what you want, you can then scan or select
Preview again to see the new scan area.

Adjusting the Brightness

If the preview of your image appears too dark or too light, you
can adjust the Brightness scroll bar on the Epson TWAIN
Scanner Control screen to make your image lighter or darker.
Brightness values range from -3 to +3. To lighten a dark
original, use -1 to -3. To darken a light original, use +1 to +3.

Adjusting the Magnification

If you want to increase or decrease the size or scale of your
image, you can use
TWAIN Scanner Control screen to select sizes from 50% to
200% of
the
The size you select is not reflected in the preview scan but is
reflected in the final scan. Also, the size of the image on the
monitor is only
image when printed. The Width and Height settings on the
Scanner Control screen show the exact size of the image.
3-6 Using TWAIN
default, click outside the selected
the
the image.
Magnification scroll bar on the Epson
the
original.
approximation of the actual size of the
an
edge of box to a different
the the
mouse
the
the