Pass-through (Y) connection
When using this connection method, first install the TM printer driver.
Then, install the Customer Display driver.
USB
Serial
If you use a connection with interface conversion connector or interface expanded board,
the operation is not guaranteed.
Select the appropriate connection patterns for each TM printer model (interface
specification) and configure the communication settings of each interface.
Use DIP switch to configure communication settings of the TM printer and the Customer
Display. For more details, see the manuals bundled with the products.
Connecting cable
For the Serial connection, use a cable configured as follows.
Modular
OR
Modular
Chapter 1 Overview
13
1