Removing And Attaching The Projector Lens Unit; Removing - Epson PowerLite Pro Z8000WUNL User Manual

Removing and Attaching the Projector Lens Unit

Removing and Attaching the Projector Lens Unit

Removing

Caution:
• Only remove the lens unit when necessary. If dust or dirt enter the projector,
projection quality deteriorates and it could cause a malfunction.
• Try not to touch the lens with your hand or fingers. If fingerprints or oils are left on
the surface of the lens, projection quality deteriorates.
• Before replacing the lens unit, use the lens shift function to horizontally and
vertically center the lens.
Procedure
A
Remove the interface cover.
1 Loosen the screw.
2 While pulling up the interface cover open switch, pull the
interface cover straight out.
B
Remove the front cover.
1 Loosen the two screws.
2 Loosen the screw.
3 Pull the cover straight out.
140